This heater for hire has an output of 39kW (132,000 BTU/hr) and is 100% thermally efficient.
It is a direct fired oil heater which is commonly used for localised heating in workshops, foundries and construction. It can also be used in some horticultural and agricultural situations.
This kerosene blow heater has a built-in electronic control box for automatic ignition, a flame control sensor and overheat thermostat. The AISI 430 stainless steel combustion chamber is protected by a post - ventilation cooling down process. This blow heater can be easily switched between voltages by simply removing the voltage switch cover, switching to the required voltage, and fitting the appropriate plug and power cable.
As with all forms of direct fired heating, this blow heater should only be used in a well ventilated area.
The heater can be operated in either a manual or automatic position. When the main switch is set to manual (I) this heater will run continually until it is switched off manually. Alternatively, when the main switch is set to automatic (II) the heater can be operated via an optional Heavy Duty Thermostat, which has a temperature range of -5/+50°c. It has a durable fuel tank, made from hydrocarbon resistant polythene. The fuel lines are hydrocarbon resistant rubber with a reinforced textile.
This heater is pump driven, providing a consistently accurate pump pressure and quality of ignition.
|Dimensions||1075mm x 440mm x 615mm|
|Fuel Consumption||3.04 l/hr|
|Tank Capacity||42 litres|
|Runtime constant per tank of fuel||12 hours|